BNMKQ - 6029, NON-FIBERED ASPHALT COATING/PRIMER
- MSDS: BNMKQ
- Manufacturer: GIBSON HOMANS CO
- Product Name: 6029, NON-FIBERED ASPHALT COATING/PRIMER
- National Stock Number: 5610-00N030760
Product Identification
Product ID:6029, NON-FIBERED ASPHALT COATING/PRIMER
MSDS Date:01/08/1987
FSC:5610
NIIN:00N030760
MSDS Number: BNMKQ
Responsible Party
TWINSBURG, OH 44087
US
Emergency Phone: 216-425-3255
Info Phone: 216-425-3255
Cage: GIBHO
Contractor
Telephone: 216-425-3255
Cage: GIBHO
Ingredients
STODDARD SOLVENT; (MINERAL SPIRITS)
CAS: 8052-41-3
RTECS: WJ8925000
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM; 9293
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN:PROLONGED/REPEATED CONTACT MAY
CAUSE IRRITATION. EYES: MAY CAUSE IRRIT, BLURRED VISON. INHAL:
EXCESSIVE BREATHING OF HIGH VAPOR CONC CAN CAUSE NASAL & RESP
IRRIT, DIZZ, NAUS, POSS UNCON & EVEN AS PHY. INGEST: CAN CASUE GI
IRRIT, NAUS, VOMIT & DIARR.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:SKIN: WASH WITH SOAP AND WATER. EYES: FLUSH WITH WATER FOR AT
LEAST 15 MIN. GET MED ATTN. INHAL: REMOVE FROM AFFECTED AREA.
ADMINISTER O2 IF NEEDED. INGEST: DO NOT INDUCE VOMIT. GET MED ATTN.
Fire Fighting
Flash Point Method:PMCC
Flash Point:100F,38C
Lower Limits:0.8%
Upper Limits:7%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . WATER MAY CAUSE FROTHING, APPLY CAUTIOUSLY.
Unusual Fire/Explosion Hazard:KEEP AWAY FROM SOURCES OF IGNITION.
Accidental Release
Spill Release Procedures:DIKE SPILL AREA. REMOVE SOURCES OF IGNITION.
VENTILATE AREA IF NECESSARY. RECOVER FREE LIQUID. ADD ABSORBENT TO
SPILL AREA.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP AWAY FROM SOURCES OF IGNITION.
USE ONLY WITH ADEQUATE VENTILATION. AVOID PROLONGED/REPEATED
CONTACT WITH SKIN.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.
Exposure Controls
Respiratory Protection:NOT NORMALLY NEEDED IN WELL VENTILATED AREA. IF
TLV IS EXCEEDED A NIOSH/MSHA APPROVED BREATHING APPARATUS IS
RECOMMENDED.
Ventilation:LOCAL EXHAUST AS NECESSARY TO REMAIN BELOW TLV LEVEL.
Protective Gloves:OIL RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Work Hygienic Practices:AVOID PROLONGED OR REPEATED CONTACT WITH SKIN.
REMOVE CONTAMINATED CLOTHING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:2.0PSI
Vapor Density:>1
Spec Gravity:1.0(H2O=1)
Evaporation Rate & Reference:<1(BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK LIQUID, SOVLENT ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:CO2, CO.
Disposal
Waste Disposal Methods:DISPOSE OF ACCORDING TO FEDERAL, STATE AND LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.